 | |
 | | SYS-1025C-M3B | - SuperServer 1025C-M3B (Black)
|
| | |
| | Super X7DCL-3 |
| | |
| | CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence (Harpertown
/Clovertown processor)
up to 3.16 GHz - Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
| | System Bus | - 1333 / 1066 MHz system bus
| | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| | |
| | Memory Capacity | - Six 240-pin DIMM sockets
- Supports up to 48GB 667/ 533MHz DDR2 ECC Register Single/Dual Rank memory *
- Dual channel memory bus
- Memory must be populated in pairs
| | Memory Type | - 667/533MHz Register DDR2 ECC Single/Dual Rank SDRAM 72-bit, 240-pin gold-plated DIMMs *
| | DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| | |
| | Chipset | - Intel® 5100 (San Clemente) chipset
- Intel® ICH9R
| | SAS | - Broadcom 1068E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
| | SATA | - Intel ICH9R SB SATAII Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMLC)
- (Optional: AOC-SIMLC)
- NOTE: KVM-over-LAN supported w/ AOC-SIM1U+ - PCB 1.1A only
| | Network Controllers | - Intel® 82573V & 82573L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | - XGI Z9 with 32 MB of video memory
| | Super I/O | | | Clock Generator | |
| | |
| | SAS | | | Serial ATA | - Six Serial ATA ports
- Four SATA hard drives supported
| | IDE | - Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- Compact Flash (40-pin connector, IDE 1, single channel) slot
| | Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB
| | LAN | | | USB | - 2x USB rear ports
- 3x USB internal header
- 5 total USB ports, 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Header
|
| | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix ® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
| | | |
| | Form Factor | | | Model | |
| | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
|
| | |
| | PCI-Express | | |
| | |
| | Hot-swap | - 8x 2.5" Hot-swap SAS / SATA drive bays
|
| | |
| | 1x SAS / SATA Backplane |
| | | |
| | Fans | - 4x 40x28mm high-efficiency fans
- 6x fans maximum
|
| | |
| | 560W AC to DC power supply w/ PFC | | AC Voltage | - 100-240 V, 50-60 Hz, 6.5-2.6 Amp
| | +5V | | | +5V standby | | | +12V | | | -12V | | | +3.3V | | | Certification | 
Silver Certified
[ Test Report ] |
| | |
| | CPU | - Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of eight 4-pin fans
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - System Information LED
- Suspend-state Indicator LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| | |
| | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
